Corghi EXACT BlackTech X Betriebsanleitung Seite 72

Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
the option must be enabled in the set-up.
Customer records
To access select the
icons.
Position the cursor on the card of the customer
you want, and select it with ↵ to visualise and/
or modify the content.
printout of the addresses of the custom-
ers in the correspondence list (marked with the
symbol).
Add a customer to
the correspondence list by switching
the selection with the space bar.
The fields highlighted in blue are compulsory.
Vehicle records
To access select the
icons.
Position the cursor on the card of the vehicle
you want, and select it with ↵ to visualise and/
or modify the content.
when a customer not previously registered is
entered, the record for entering the new customer
opens automatically.
The description and make of the vehicle selected
from the databank can be modified as required
without changing the reference values.
The unit of measurement for "Mileage" can be
selected in the set-up.
The fields highlighted in blue are compulsory.
operator records
To access select the
icons.
Position the cursor on the card of the operator
requested, and select it with ↵ to visualise and/
or modify the content (Fig. 65).
72
, and
or delete one from
, and
, and
http://www.eichstaedt-elektronik.de
In addition to his first and last name, the opera-
tor must also enter the operating mode, which
refers to the tilting settings set with the Service
programme.
From the menu in figure 65, the operator can be
set as predefined and the numerical keypad can
be enabled for quick tilting positioning.
Once the numerical keypad has been enabled,
pressing keys 1,2,3,4,5 accesses the following
tilting levels:
1: Predefined position for the ROC.
2: Predefined position for the steering lock.
3: Predefined position for adjustment.
4: 1st Auxiliary position.
5: 2nd Auxiliary position.
The fields highlighted in blue are compulsory.
Vehicle selection from user
databank
To access select the
icons.
Select the vehicle from the databank using the
keys as follows:
↓, ↑, PAGE↓, PAGE↑, ←, → and the letter keys
to scroll through the makes and model descrip-
tions.
↵ to confirm the vehicle selection and visualise
the data.
During selection, the vehicle code is shown in
the status bar.
All the cars and vans up to and including 3500 kg
are shown on the screen.
creates a new vehicle.
Vehicle data input
Enter the reference data of the vehicle included
in the user databank.
The fields highlighted in blue are compulsory.
copies the vehicle's data into a new user
databank record and opens it in modify mode.
deletes the selected vehicle.
sets the units of measurement required.
Operator's manual EXACT BlackTech X
, and