Asa Network; Aligning Procedure Count; User File Backup - Corghi EXACT BlackTech X Betriebsanleitung

Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
(6) Checking and adjustment of the toe
curve
S-Point Selection
Set the steering wheel straight and fit the steer-
ing wheel clamp.
Check and adjust the toe curve,
only when the car no longer travels straight after
hitting a bump or a manhole cover, when pieces
of the suspension system have been replaced,
after an accident or when specifically required
by the manufacturer.
The toe curve checking and adjustment sequence
depends on the type of suspension installed
on the car: there are differences for cars with
STANDARD, SPORTS or ALL-TERRAIN chassis.
Follow the instructions on the screen for the
operations to be performed and the adapters
to be fitted on the checking tool.

ASA NETworK

To enable use of the Asa Network protocol, set up
the aligner after accessing the technical services
setup function
Then set the "Procedure" / "Asa Network Proce-
dure" option as "enabled".
when the aligner software is run, it automatically
checks the network connection, and the connec-
tion icon appears in the windows status bar.
Operation
After starting the alignment procedure,
the screen for selection of the working order for
processing will appear.
If the network connection is not established, a
dialogue window asks whether you wish to return
the connection,
tion of the vehicle from the databank without
connecting, .
Once the order has been selected, the working
data are loaded in the form, after which the
vehicle has to be selected from the databank
in the usual way.
The alignment procedure which follows is the
usual one.
70
icon,
, and
, or move on to selec-
http://www.eichstaedt-elektronik.de
The ,
used to print, and to save the job done if you wish.
ends the session and sends the notifica-
tion that the order has been processed, and the
attached .XML file containing the data of the job
done to the Network Manager.
QUICK RADAR PROCEDURES
From the LOGO page, select the icons
and in succession to access the radar
adjustment page.
Cal One-Touch QUICK PROCEDURE
From the LOGO page, select the icons
and in succession to start the Cal One-
Touch quick procedure.
.
ALIGNING ProCEDUrE
The equipment now features a count of the
number of alignment jobs performed. The count
increases after performance of the ROC proce-
dure, including ROC skip.
To display the count, select the
,
and icons from the initial screen.

USEr FILE BACKUP

From the logo page, select the icons
and , Fig. 56.
The page shown in Fig. 57 will open, allowing
you to select the backup or restore procedure
of the data regarding:
• The databank.
• Files of jobs carried out.
• Customer databank.
• Calibration log.
Operator's manual EXACT BlackTech X
or icons can be
CoUNT
,