Corghi EXACT BlackTech X Betriebsanleitung Seite 64

Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
Updating the databank online
It is possible to update the databank online by
following these instructions.
First note the number of the Sim Card (5 figures)
and the name of the aligner:
• go to the assistance menu of the aligner and
select the item Smartcard management
• or from the main page (LOGO), pressing
CAP+F12.
In order to update the aligner databank, you
need the DATABANKCARD
and a computer connected to the Internet.
Activate the receipt of the cookies in the browser
that will be used to download the updates.
REGISTRATION
A. Open the browser (Internet Explorer, Mozilla
Firefox) and go to the page:
www.corghi.com/infoauto.
B. Select the language and continue with the
registration, clicking on the registration link.
C. On the registration page, fill in all the fields
marked with the symbol "*" (the others are
optional).
D. At the end of the registration, continue with
the login using the username and password
chosen.
LOGIN AND DOwNLOAD OF VEHICLE CARDS
A. Open the browser (Internet Explorer, Mozilla
Firefox, etc.) and go to the page:
www.corghi.com/infoauto.
B. Insert the username and password.
C. The page for selecting the reference market
will open. Select the market.
D. At this point, the vehicle/truck selection
page opens. Select the make and model of the
vehicle you want, and proceed. 1 credit will be
subtracted from the card.
E. The vehicle card will open, and here it is pos-
sible to set the diameter of the rim and read the
data regarding the characteristic angles of the
chosen vehicle. At the bottom of the page there
are two links to download the file.
F. Downloading XML file: the vehicle card is
converted in a file that will be imported into
the aligner.
Click on the link and save the file on a remov-
able support. Save the file downloaded onto the
aligner PC in the folder ROOT " C:\ " or " D:\ ".
G. Downloading PDF file: The PDF file of the
vehicle card is opened. It is necessary to have
a PDF file reader. This file can be saved and
printed. The reference data will then be entered
into the aligner databank "by hand".
64
Information for preparing the vehicle for check-
ing and adjustment of its wheel alignment in
accordance with the manufacturer's instructions.
The programme step is automatically activated
if this information is in the databank.
To access this function from the rest of the pro-
gramme select the
The step is only active if it is set in the set-up or
operation with toe values in units of length has
been selected.
Set the rim diameter of reference to work with
toe values in millimetres or inches.
bank
values in a pre-set list.
The angle unit of measurement selected in the
set-up will be set.
Runout compensation or ROC is used to com-
pensate any geometrical errors in the rim (runout
and plane error) and errors in fitting the clamps.
The compensation skip option is available if set
in the set-up.
Apply ballast to the vehicle as instructed and
select the RUNOUT compensation method
required.
The screen shows the databank references for
the selected vehicle.
able.
able for the adjustment.
Complete display of the databank values is
available in the DATABANK DATA SUMMARY
http://www.eichstaedt-elektronik.de
(4) Preparation for wheel
alignment
(5) Diameter input (Fig. 35)
reference rim diameter stated in data-
rim diameter set by the operator.
and scroll through the diameter
to do the job in angle measurements.
(6) Compensation (Fig. 36)
indicates that the angle is adjust-
indicates that a help function is avail-
.
Operator's manual EXACT BlackTech X
icon or the F10 key.