Special Functions; Menu Management - Corghi EXACT BlackTech X Betriebsanleitung

Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
Next page Displays the sequence of
pages of the on-line help function. The icon is only
active when there is more than one page.
Save Saves the vehicle's pre-adjustment
values.
Save axle weight Saves the weight of
the axle being measured.
Yes Confirms the selection made or the
value entered.
No / Abort Aborts the selection made
or the value entered.
User code For changing the user
code.
VAS Set-up Changes the set-up settings,
entering the defaults required by the manufac-
turer for alignment of VAS cars.
MERCEDES Set-up Changes the set-up
settings, entering the defaults required by the
manufacturer for alignment of MERCEDES cars.
Manufacturer's Set-up Changes the
set-up settings, entering the CORGHI factory
defaults.

Special functions

Calibration check Checks calibration
of the targets fitted on the car (with 8 targets
only).
Single value Shows only one angle of
the selected axle at a time.
Maximum steering angle Activates
and deactivates the maximum steering angle
procedure.
52
ing angle procedure for vehicles with 2-wheel
steering.
ing angle procedure for vehicles with 4-wheel
steering.
cedure for adjusting an axle with the car lifted.
the procedure for adjusting an axle with the car
lifted, lower the vehicle.
ance data transfer from the instrument to the
wheel aligner.
pilation of the chassis height record with data
in degrees.
tion of the chassis height record with data in
millimetres.
with Mercedes wheel clamps, automatically skips
the ROC procedure.
dure with self-centring clamps, ROC procedure
is compulsory.
the additional icons for which there is no room
in the icon bar.
set of icons in the sub-menu.
the additional icons.
http://www.eichstaedt-elektronik.de
2WS steering angle Recalls the steer-
4WS steering angle Recalls the steer-
Adjustment with car lifted Starts the pro-
End of adjustment with car lifted Ends
Data transfer Automatic chassis clear-
Chassis input degrees Manual com-
Chassis input mm Manual compila-
Mercedes Clamp Selects the procedure
Self-centring clamp Selects the proce-

menu management

Open menu Opens the menu containing
Recall other icons Displays the second
Close menu Closes the menu containing
Operator's manual EXACT BlackTech X