Units Of Measurement; Technical Assistance; Status Bar - Corghi EXACT BlackTech X Betriebsanleitung

Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte

Units of measurement

Unit of measurement Selects the units
of measurement of the data on screen.
Weight unit of measurement Switches
the weight unit of measurement between kilo-
grams and pounds.
Degrees or lengths Switches the display
of values between units of length and degrees.
Length unit of measurement Switches
the length unit of measurement between mil-
limetres and inches.
Unit of measurement in degrees
Switches the unit of measurement for angle
values between centesimal and sexagesimal
degrees.
Pressure unit of measurement Switches
the unit of measurement for pressure values
between PSI and BAR.

Technical assistance

Smart Card update Main Smartcard
update procedure.
Smart Card Data Record Smartcard
reading.
Job counter Displays the number of
jobs done.

Status bar

The status bar shows messages of use during
execution of the program, in graphic form.
Insertion mode Using the keys ←
and → the cursor moves within the field and not
between two adjacent fields.
Car procedure "Demo" mode for which
the targets are not required.
Maximum steering angle enabled.
Operator's manual EXACT BlackTech X
vention.
The keypad function keys give rapid access to
programme steps. They always retain the same
functions and are only active if the relative icon
is included in the screen.
The keys indicated as in the following example
È+F12 are the combination of the "Upper case"
key and the key indicated (in the example,
F12).
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
http://www.eichstaedt-elektronik.de
Non standard toe sign convention.
Non standard thrust angle sign con-
Save job in progress.
PC keypad
Name
Databank selection
Rim diameter
Chassis clearance
Steering angle
State of vehicle
Rear axle
Front axle
Print
End of job
Vehicle adjustments
Databank
Help
Icon
EN
55