Maintenance And Cleaning - Conrad Electronic LumiNight Bedienungsanleitung

17. Maintenance and Cleaning

Maintenance or repairs are only permitted by a specially skilled person or a specialised repair
shop. There are no components on the inside of the product that need maintenance by you, this
is why you should never open it (apart from the described approach to insert or change the
batteries, in these instructions).
To clean the exterior of the base station or the plug-in power supply, a dry, soft and clean cloth
is sufficient.
Dust on the base station can be easily removed with the help of a long-haired, soft and clean
brush and a vacuum cleaner.

Don't press too hard on the display, this may cause scratch marks or lead to
failure of the display.
To remove dirt on the outdoor sensor, a soft cloth, slightly dampened with lukewarm water can
be used.
Never use aggressive cleansing agents or other chemical solvents since this
may damage the surface of the housing or even impair operation.
80