I) ºc/ºf Temperature Unit Setting; J) Weather Forecasting Icon Sensitivity Setting; Alarm Setting; L) Snooze Setting And Stopping The Alarm - Conrad Electronic WS-9611IT Bedienungsanleitung

I) °C/°F temperature unit setting
The default temperature reading is set to °C (degree Celsius). To select °F (degree Fahrenheit):
1. The "°C" will be flashing, use the "CH/ +" button (3) to toggle
between "°C" and "°F".
. Once the desired temperature unit has been chosen, confirm
with the "SET" button (1) and enter the "Weather Forecast Icon
Sensitivity setting" or exit the setting mode by pressing the
"SNOOZE/ SUN" button (5).
J) Weather forecast icon sensitivity setting
For locations with rapid changes of weather conditions, the threshold can be set to a different level for
faster display of changing weather conditions.
1. Press the "CH/ +" button (3) to set the weather sensitivity level.
There are 3 levels of setting: 1,  and 3; level 1 is the most sensitive
setting, level 3 is the least sensitive setting (default setting is "").
. Confirm with the "SET" button (1) and exit the Manual settings.
K) Alarm setting
To set alarm:
1. Press and hold the "ALM" button (4) for about 3 seconds until the
alarm time display flashes.
. The hour digit and the alarm icon will be flashing. Press the
"CH/ +" button (3) to adjust the hour.
3. Press the "ALM" button (4) once and the minute digit will start
flashing. Press then the "CH/ +" button (3) to set the minutes.
4. Press the "ALM" button (4) once to confirm the setting.
5. To activate/ deactivate the alarm function, press the "ALM"
button (4) once. The display of the alarm icon represents that the
alarm is "ON".
46

L) Snooze setting and stopping the alarm

1. When the alarm is sounding, press the "SNOOZE/ SUN" button (5) to activate the snooze
function. The alarm will stop and reactivate after the time interval of the snooze time preset
by user.
. To stop the alarm completely, press any buttons other than the "SNOOZE/ SUN" button (5).

M) Weather forecast and tendency

One of the 15 different weather icons (featured by Weather man with different clothing) is displayed
in the centre of LCD, which indicates the different forecast weather condition due to air pressure
level (Sunny, Sunny + Cloudy or Cloudy + Rainy) and the current outdoor temperature (Temperature
value detected by Channel 1):
≥ 26°C 19 – 25.9°C
Sunny
Sunny +
Cloudy
Cloudy +
Rainy
10 – 18.9°C 0 – 9.9°C < 0°C
47