J) Display Of Min/Max Values For Temperature/Air Humidity; K) Deleting Min/Max Values; L) Switching Between Time/Date Display - Conrad Electronic LumiNight Bedienungsanleitung

j) Display of MAX/MIN values for temperature/air humidity
• The maximum and minimum values for each sensor are stored separately.
This is why you should select the desired sensor (1 to 5) first by shortly pressing the key with
the outdoor sensor icon

Automatic switching of the outdoor sensors (there is a rotating arrow icon (H)
visible under the number) must not be active.
• Briefly press the key with the memory icon
- display of MAX values
- display of MIN values
- display of current values
• During the display of a MAX or MIN value you can select a different outdoor sensor with the
key that has the outdoor sensor icon
to see.
k) Deleting MAX/MIN values
• First of all activate the display of the MAX or MIN values by briefly pressing the key with the
memory icon
• Delete all MAX/MIN values by pressing the key with the memory icon
seconds.

l) Switching between time/date display

By briefly pressing the clock icon key
• time (hour, minute, second)
• time (hour, minute) and weekday
• date
(4).
(2).
(2), to switch between:
(4) and whose MAX or MIN values you would like
(1) you can switch between:
(2) for about 2
75