Conrad Electronic LumiNight Bedienungsanleitung Seite 63

• Set the minutes with the " " or " " keys, if so desired. If the respective key is pressed for
a longer period of time, quick adjustment is performed.
When adjusting the minutes the seconds are automatically set to "00".

If no key is pressed for 10 seconds the current setting is copied and the setting
mode is exited. The set time is displayed.
• By briefly pressing the time key
• The year display flashes.

Please note: If the DCF reception was active beforehand, it is switchd off when
the year is adjusted!
• Set the year with the " " or " " keys, if so desired. If the respective key is pressed for a
longer period of time, quick adjustment is performed.

If no key is pressed for 10 seconds the current setting is copied and the setting
mode is exited. The set time is displayed.
• By briefly pressing the time key
• Next to the date display "D and "M" will flash.
• With the " " or " " keys the sequence can be selected in which the display of the date ("D")
and the month ("M") is shown.
• By brielfy pressing the time key
• The display of the month ("M") flashes.

Please note: If the DCF reception was active beforehand, it is switched off when
the month is adjusted!
• Set the month with the " " or " " keys, if so desired. If the respective key is pressed for
a longer period of time, quick adjustment is performed.

If no key is pressed for 10 seconds the current setting is copied and the setting
mode is exited. The set time is displayed.
• By briefly pressing the time key
• The display of the date ("D") flashes.

Please note: If the DCF reception was active beforehand, it is switchd off when
the date is adjusted!
(1) you will change to the next setting step.
(1) you will change to the next setting step.
(1) you will change to the next setting step.
(1) you will change to the next setting step.
65