F) Displaying Air Pressure Of The Past 24 Hours; G) Selecting Display Unit For Temperature (°C/°F) - Conrad Electronic LumiNight Bedienungsanleitung

f) Displaying air pressure of the past 24 hours

By pressing the file folder icon key
is shown on the display.
On the left, next to the reading the respective hour (-1 to -24) is shown in a frame (K).

When you use the device for the very first time, naturally there are no readings
for the last 24 hours available, only lines will be shown ("- - - -").
g) Selecting display unit for temperature (°C/°F)
• Open the battery compartment.
• Briefly press the "°C/°F" (13) key, to select the unit for the temperature.
• Close the battery compartment again.
h) Switching over reading display for outdoor sensors
The base station can receive and display the readings of up to 5 outdoor sensors (one included
in delivery).

Each outdoor sensor has to be set to a different channel (1....5).
• Press the key with the outdoor icon
necessary.
• On the display the number of the presently selected outdoor sensor (G) will appear.
• If a rotating arrow icon (H) is shown under the number, this means that the base station will
change the outdoor sensors automatically.
(3) several times, the air pressure of the last 24 hours
(4) on the front of the base station several times if
73