C) Checking The Swing Of The Rudder - Reely Phönix Bedienungsanleitung

Rudder function:
If the control stick for the motor speed and rudder functions (see fig 2, item 10) is moved to the left, the rudder must deflect to the left.
If the control stick for the motor speed and aileron functions is moved to the right, the aileron must deflect to the right.
If the rudder reacts opposite to the above described function, you can switch the direction of the rudder servo with the reverse switch (see fig. 2, item 12, "CH4"
switch).
c) Checking the Rudder Deflections
If correctly assembled and if the transmitter settings are made properly, the rudders should show the following deflection values (measured at the rear edge):
Aileron 8 - 10 mm up and down
Elevator rudder 8 - 10 mm up and down
Rudder 11 - 15 mm to the left and right
The rudder breakouts are preset ex works or result automatically from the respective model design. If necessary, you may increase or decrease the rudder
breakouts by selecting other control points for the control sticks on the servo lever or rudder lever.
Figure 10f
Figure 10g
41