elmeg CS290 Bedienungsanleitung Seite 78

Important notice for export variants:
Please ask your specialized dealer/distributor for the access number of the
download server for your country!
Download server
elmeg server
Begin as follows:
F S
a
config
The telephone then restarts from the BIOS.
If you are using your telephone with a pabx system, first enter the line access digit to
obtain external line access, and then the number for the download server.
t
Enter the number of the Server PC:
»05171901190«.
To cancel a download already in progress
press the softkey »Abort« or the
button.
In some circumstances all of the data in your phone may be deleted after a firmware
download. If this is the case, the following notice is given prior to starting the download:
»All data will be deleted Continue?«. The firmware download is started only
after you have confirmed this prompt by pressing the softkey »ok«. If the data for the te-
lephone are not deleted during the download, the download is started without first dis-
playing the above prompt.
Telephone BIOS
This telephone is equipped with a BIOS (basic functions) in English. The BIOS functions
also remain available even if the firmware of the telephone does not operate properly, or
if new firmware was not loaded completely (e. g. if the PC crashed while loading the firm-
ware).
The following functions are available in the telephone's BIOS:
Telephone number
++49-(0)5171-901190
> S
service
E
34
S S
software ok
ˆPlease dial
ˆ
ˆPlease dial
ˆ05171901190
Abort