elmeg CS290 Bedienungsanleitung Seite 58

Activate call forwarding
In the menu »Call forwarding delay« click the softkey »msn-1« (see figure 4 on
page 13).
t
Enter the number to which the calls are to
be forwarded.
In this example: »0123456789«.
O
Confirm your entry by pressing OK.
Call forwarding has been registered. The
three dots at the right lower corner flash al-
ternately.
Viewing current call forwarding
When the telephone is idle, a »C« on the top line indicates that call forwarding has been
activated. If you wish to view the call forwarding setting, proceed as described on page
6.
Deactivating call forwarding
In the menu »Call forwarding« press the softkey »off«.
S
Indicate the type of call rerouting you wish
to deactivate.
S
Select the telephone number for which
you wish to deativate the call forwarding
feature.
Call forwarding is deactivated. The three
dots at the right lower corner flash alterna-
tely.
Programming VIP numbers
You can program VIP numbers for each of the ten buttons
name (20 characters max. ) and a telephone number (26 digits max. ).
Programming VIP entries
The following example describes how to program a VIP entry for destination »V5«. If you
wish to program further entries, proceed as described for "V5".
In the menu»Program VIPs« press the softkey »New«. Use the arrow keys to select the
storage location and confirm by pressing OK.
ˆ Call forwarding delay
ˆMSN-1>0123456789_
ˆ Call forwarding delay
ˆMSN1>0123456789
ˆ Call forwarding quit
ˆ all
ˆ Call forwarding quit?
ˆ msn-1
ˆ Call forwarding quit
ˆMSN-1
1
14
...
}
fixed
...
0
... including a