elmeg CS290 Bedienungsanleitung Seite 70

S
Press the corresponding softkey to select
a number stored in your telephone, or
press »new« to enter a new phone num-
ber. Example: »new«.
t
Enter the telephone number.
For example: »22«.
O
Confirm your entry by pressing OK.
The UUS1 text message is then transfer-
red to the defined recipient.
The most recently sent message will be stored temporarily in your telephone.
When sending text messages the first number (»MSN-1«) entered in the telephone
is transmitted with the message.
Viewing a new text message
You can view a new message using either the caller list (see page 20) or the list of tempo-
rarily stored text messages (SMS or UUS1).
Temporarily stored text messages
The following features are available when viewing temporarily stored text messages:
• Resending a text message.
You can edit a text message before actually resending it.
Deleting a text message.
•
Putting a text message into the list of permanently stored messages (UUS1 only).
•
Begin as follows:
>
a
Example: Viewing temporarily stored UUS1 text messages
The most recently added text message is displayed first. On the first line of the display is
shown the number of the short message on the list together with the telephone number
of the recipient or the sending party.
A new, unread text message is marked with an »*«.
An arrow in front of the number or the name for the text message that you are viewing in-
dicates a received or sent text message (Receiving: »{0123456789«; Sent:
S S
mail uus or sms
26
ˆ Send mail / UUS
ˆ direct vip
ˆ Define targt. numb
ˆ>22_
ˆSend mail / UUS
ˆBes.. }22
S
read
new
...