Service Functions - elmeg CS290 Bedienungsanleitung

Service functions

Read firmwareversion of the telephone
You can have the version and the model of your phone displayed so that you can deter-
mine, for example, which firmware version is available in your phone.
Begin as follows:
F
a
>
You then see the firmware version of your
telephone. In this example: »V3.00«.
Press the right arrow button to view further
data.
C
Press the C button to exit the menu.
Downloading new firmware
• Do not press any keys (unless prompted to do so) or plug in or unplug any con-
nectors while data transfer is in progress. If the connecting line is interrupted du-
ring a download, restart the download program and proceed as described previ-
ously.
Once the new firmware has been loaded completely the telephone performs a
•
RESET and is then available for use again.
• In some circumstances all of the data in your phone may be deleted after a firm-
ware download. If this is the case, a notice is given prior to starting the download.
Prior to downloading, save all of your telephone configuration data to your PC.
Downloading new firmware via elmeg's server PC
ELMEG GmbH & Co. KG Kommunikationstechnik provides a server PC which can be
used for loading new firmware into your telephone. In this case, the firmware is downloa-
ded via the ISDN connection. Download can take six minutes approximately, depending
on the size of the firmware file. Please note that there is a charge for loading firmware via
an external ISDN connection.
S >
config
33
S S
service version
ˆSoftware-Identificatio{}
ˆtype:elmeg CS290 V3.00
ˆ Service Functions
ˆversion software
}
data