elmeg CS290 Bedienungsanleitung Seite 47

Connecting a headsets (not included in the delivery)
Recommended: Headsets supplied by Plantronics with U10PS connection
cord
Connect the headset as shown in figure 1 . After this, place and secure the headset
cord (3) in the cord groove (4) and lock it below the two cord retainers (5).
You can use the handset or the headset for making calls.
Headset »Firefly F142 N« supplied by Plantronics:
With this headset, the LED located in the microphone arm is controlled by the phone's
headset button. In the menu »Volume, etc.« (see figure 3 on page 11) press the soft-
key »headset« and confirm by pressing »ok« to configure the phone for this headset.
6
Fig. 1
Pin assignements of the headset
4
3
2
1
Changing the label panel
The label panels for the function keys are included on a separate sheet enclosed in the
operating instructions. Cut out the label you wish to use.
To change the label panel, press the flexible cover together between your index finger
and thumb and lift it out. The label panel can now be changed.
2
4
5
5
4
1 - Microphone +
2 - Handset (Ground)
3 - Handset
4 - Microphone (Ground)
3
3
6
1
4