Call Waiting; Setting The Contrast - elmeg CS290 Bedienungsanleitung

t
Enter the name of the VIP entry »V5«.
In this example: »TONY«.
O
Confirm your entry by pressing OK.
t
Enter the telephone number.
In this example: »0123456789«.
O
Confirm your entry by pressing OK.
Editing VIP entries
In the menu»Program VIPs« press the softkey »list«. Use the arrow keys to select
the desired entry and confirm by pressing OK. Now proceed as has been described for
programming VIP entries.

Call waiting

A waiting call is indicated by a brief acoustic signal in the speaker and also displayed.
You can set the volume of the call waiting signal and select whether a waiting call is to be
signaled only one time, or several times (see page 12).
The following entries are possible for the call waiting feature:
With an ongoing connection or while a connection is being establis-
»no«
hed, no further calls will be signaled. The caller hears the busy signal.
Call waiting is possible when there is only one active call waiting and no
»ok«
other call is waiting at your telephone.
In the menu »settings« press the softkey »wait«.
S
Select the appropriate setting by pressing
either »no« or »ok«.

Setting the contrast

You can set individual contrast levels.
In the menu »settings« press the softkey »contrast«.
<>
Use the arrow buttons to set the contrast.
O
Confirm your entry by pressing OK.
ˆ Program VIP name
ˆV5>TONY_
ˆ Program VIP number
ˆV5>0123456789_
ˆ Reprogram VIP
ˆV5:TONY
ˆ Call waiting enable?
ˆ no
ˆ Display contrast
ˆ - ©©©©----- +
15
{}
ok
{}