Additional Information In The Display - elmeg CS290 Bedienungsanleitung

You can program the following functions:
button type
Auto-answer with headset operati-
on on / off
Message enable/inhibit
(message inhibit filter)
Headset on / off
extension key
MSN-Assignment
(Carrier / provider preselection)
Call rerouting (AWS)
Team function log-on/log-off
VoiceMail button
Direct dialing (telephone number,
dtmf sequence or keypad sequen-
ce)

Additional information in the display

When the telephone is in the idle state, additional in-
formation about functions that have been configured
are shown on the top line of the display.
»V« The dial filter for the telephone has been configured via the PC configuration
program. Phone numbers or partial numbers are now enabled or inhibited for
calling.
Call forwarding configured.
»C«
>
Press the right arrow button and then the
S
softkey »Info« if you wish to get more in-
formation about the configured functions.
level restrictions
1 / 2 level 2, buttons 4 and 5 only
1 / 2 level 2, buttons 4 and 5 only
1
1
1 / 2
1 / 2
1 / 2 level 2, buttons 4 and 5 only
1
1 / 2
ˆ17.02.02 08:30
ˆ tbook
ˆ17.02.02 08:30
ˆ mail
6
V C }
vip
V C {
rate info