elmeg CS290 Bedienungsanleitung Seite 73

Call waiting, Enquiry call, Broker`s call and three-party
conference
Call waiting
If, during an ongoing call, a second call comes in for you, the second call is signaled
when »Call waiting on« is set (see page 15).
g
waiting call
Enquiry Call
You have the option of establishing another connection during an ongoing call using the
enquiry call function.
g
Call with subscriber Party 1 is put on hold
An active connection can be terminated by pressing
that was previously put on hold.
Broker`s call
If you have more than one connection active at your system telephone (call waiting or en-
quiry call), you can talk to these parties alternately.
>
g
Call with sub-
scriber 2
If you have configured connection keys you can also carry out Broker's calls between
different callers using these keys.
To terminate an active connection, press
was previously put on hold.
Conference call
If you have an active connection and a connection on hold at your system telephone,
you can initiate a conference call with these two parties. All three parties can speak to
one another.
g
Call with subscriber 1;
Subscriber 2 is put on hold
To end the three-party conference, press the softkey below »back_to_«. You are re-
connected with the subscriber of the last previous active connection. The other subscri-
ber is then put on hold.
S
Call with subscriber 2;
accept
Subscriber 1 is put on hold
R
t
Dial number
S
g
Call with sub-
conn1
scriber 1
T
S
Conference with subscribers
conf
29
g
g
Call with subscriber 2
T
. You can return to the call
S
g
Call with sub-
conn2
scriber 2
. You are then returned to the call that
d
1 and 2
S
...
etc.
...
conn1
etc.