Transport; Loading The Vehicle; Towing The Vehicle - Kärcher MC 130 plus Betriebsanleitung

Holder for supporting the front power lift
1
Front power lift frame
2
4. Use a lift truck to move the changing carriage under the front
power lift.
The holder for supporting the front power lift must sit in the
frame of the front power lift when the lift truck is raised.
5. Move the front power lift out using the lift truck.
6. Set the front power lift down in a safe place and move the lift
truck out.

Transport

Loading the vehicle

DANGER
Risk of injury due to incorrect transport
Mind the weight of the vehicle.
Slowly and carefully drive the vehicle onto the transport vehicle.
ATTENTION
Damage to vehicle
Do not load the vehicle with the crane.
Do not use a forklift.
1. Slowly drive the vehicle onto the transport vehicle.
Note
If the vehicle is not ready for running, see Chapter Towing the ve-
hicle.
Fastening the transport lock to the articulated joint
Bolt with safety cotter
1
Transport lock
2
Transport lock storage
3
1. Pull out the safety cotters.
2. Pull out both bolts.
3. Remove the transport lock out from storage.
4. Attach the transport lock.
5. Insert the bolts.
6. Lock the bolts with safety cotters.
84
WARNING
Danger of accident
Secure the vehicle against slipping during transport.
1. Park the vehicle.
2. Secure the vehicle with lashing straps on both sides at the il-
lustrated lashing points.
Note
If the vehicle with hopper is loaded in reverse for transport, the
cover of the waste container must be additionally secured with a
strap to prevent it from opening.
Note
The towing eye with retaining pin and locking pin are located in a
storage compartment under the passenger seat.
Towing eye
1
Retaining pins
2
Locking pin
3
Locking pin for bolt
4
Bolt
5
1. Open the storage compartment under the passenger seat and
remove the towing eye.
English
Securing the vehicle

Towing the vehicle

Fitting the towing eye