Sweeping Mode - Kärcher MC 130 plus Betriebsanleitung

7. Switch off the ignition and remove the ignition key.
8. Wait for 30 seconds to allow the engine control unit storage
process to complete.
9. Turn the main switch to position 0.

Sweeping mode

Brush contact pressure pedal
Press the pedal briefly: full brush contact pressure for heavy soil-
ing.
Hold the pedal pressed: Suction mouth remains lowered when
reversing, vacuumed substances are also taken up when revers-
ing.
Setting the sweeping parameters
(A) Button for setting the side brush speed
For individual extraction (option), left side brush speed button
(B) Button for setting the side brush speed
For individual extraction (option), right side brush speed but-
ton
(C) Button for setting the engine speed
Note
The suction power depends on the set engine speed.
 1600 rpm Light waste
 2200 rpm Normal soiling
 2500 rpm Strong, heavy soiling
(D) Left and ride brush contact pressure button
For individual extraction (option), right side brush contact
pressure button
(E) Left and ride brush contact pressure button
For individual extraction (option), left side brush contact pres-
sure button
(F) Press the Save button to save set values or programs
(G) Rotary knob for changing values and selecting programs
1. Switch on the PTO.
2. Press the Side brush speed button.
The settings appear on the display.
3. Use the rotary knob to select the desired side brush speed.
4. Press the Save button.
The side brush speed has now been saved.
5. Press the Engine speed button.
The settings appear on the display.
6. Use the rotary knob to select the desired engine speed.
7. Press the Save button.
The engine speed has now been saved.
8. Press the Side brush contact pressure button.
The settings appear on the display.
9. Use the rotary knob to select the desired contact pressure.
10.Press the Save button.
The contact pressure is saved.
74
Sweeping with a 2-brush system
Lower/raise sweeper system and switch brushes on/off (left/
1
right)
Lower/raise right side brush and switch on/off (right/left) (op-
2
tion)
Raise/lower suction mouth
3
PTO on/off
4
Switch-in 3rd Side brush (option)
5
Inclination of 3rd Side brush (option)
6
Water circulation function on/off
7
Suction fan on/off
8
Note
The suction fan has an afterrun time of approx. 15 seconds af-
ter being switched off
"eco" e function
9
Switches the complete work program on.
PTO, side brush, suction fan, fresh water, water circulation
(recycling water)
Water pump on/off
10
Note
The indicators in the switches light when the switches are
switched on.
1. Set the engine speed on the display.
2. Set the side brush speed.
3. Start the engine, see chapter Start motor.
4. Switch on the PTO.
5. Switch on lower suction mouth.
6. Switch on the suction fan.
7. Press the left joystick to the left.
The left side brush moves outwards, lowers and is switched
on.
8. Press the right joystick to the right.
The right side brush moves outwards, lowers and is switched
on.
When brushing dry, dusty waste:
9. Switch on the water pump.
Optional: Switch on the water circulation system if necessary.
Emptying the waste container
CAUTION
Risk of tilting
Only empty the waste container on a firm even subsurface.
Maintain the safety distance while emptying on dumps or ramps.
CAUTION
Danger due to rolling away
Set the travel direction lever to neutral for emptying.
Apply parking brake.
CAUTION
Danger of injury
Switch off the suction fan before emptying the waste container.
CAUTION
Risk of injury
During the emptying process, persons and animals must not
abide within the swivelling range of the waste container.
English