Herunterladen Inhalt Inhalt Diese Seite drucken

F) Function "Storage For Recording; G) Function "Display Items; H) Function "Tv System - Sygonix 1486623 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

f) Function "Storage for recording"

Here, the data carrier is used to save the surveillance videos can be set. The screen/DVR has both an insert for an
MicroSD/MicroSDHC memory card and via a USB connection for a USB stick or a USB hard disc.
• After calling the function, use the control buttons "
• Save the selection with the button "OK" (9); then you will leave setting mode again.
To leave setting mode without saving the settings (cancel), briefly push the button "MENU" (6). The display
will switch back to the prior menu.

g) Function "Display items"

The display of the screen/DVR can show various information, e.g. the channel number. Since these small figures may
cover important details in the image, they can be switched on and off separately. This way, you can specify whether
you want to see the information or not.
• After calling the function, use the control buttons "
• Use the button "OK" (9) to switch the display of the respective icon on or off (a small check mark is displayed when
the display is on).
• The following displays/symbols are available:
"Network"
"RSSI"
"SD/USB status"
"Camera"
"Battery"
• To leave setting mode, briefly push the button "MENU" (6).

h) Function "TV system"

Here, the TV standard (PAL or NTSC) is used for the AV output can be set.
• After calling the function, use the control buttons "
• Save the selection with the button "OK" (9); then you will leave setting mode again.
To leave setting mode without saving the settings (cancel), briefly push the button "MENU" (6). The display
will switch back to the prior menu.
Network status
Signal strength of the radio camera
Display of the data carrier type that is being used
Channel number
Charge condition display of the internal Li-Ion rechargeable battery of the screen/DVR
" or "
" to select the desired data carrier type.
" or "
" to select from the respective symbols to be displayed.
" or "
" to choose between "PAL" or "NTSC".
69

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis