C) Function "Language; D) Function "Record Mode; E) Function "Format Sd/Usb - Sygonix 1486623 Bedienungsanleitung

c) Function "Language"

• After calling the function, you can select the desired language with the control buttons "
• Save the selection with the button "OK" (9); then you will leave setting mode again.
To leave setting mode without saving the settings (cancel), briefly push the button "MENU" (6). The display
will switch back to the prior menu.

d) Function "Record mode"

Here, you can set what happens when the MicroSD/MicroSDHC memory card used or the USB data carrier is full.
• Use the control buttons "
"Normal": If the memory card or the USB data carrier is full, the recording is terminated.
"Overwrite": If the memory card or the USB data carrier is full, the respective oldest recordings are automatically
overwritten.
• Save the selection with the button "OK" (9); then you will leave setting mode again.
To leave setting mode without saving the settings (cancel), briefly push the button "MENU" (6). The display
will switch back to the prior menu.

e) Function "Format SD/USB"

Memory cards of type MicroSD or MicroSDHC and USB drives are usually formatted in the file system FAT/FAT32 and
can be used in the screen/DVR at once.
Conventional hard discs, however, are either empty/unformatted, or were partitioned/formatted on a computer (and on
Windows PCs usually in file system NTFS). In both cases, such hard discs could not be operated at the screen/DVR.
For this reason, the screen/DVR offers the option of formatting the connected data carrier in the file system FAT32.
Attention!
When formatting, all data on the respective data carrier will be lost!
• After calling the function, use the control buttons "
format.
• Briefly push the "OK" button (9). A safety prompt appears.
• Use the control buttons "
• To confirm the selection, push the button "OK" (9). Alternatively, push the "MENU" (5) button to return to the previ-
ous menu (cancel).
If formatting of the data carrier was confirmed, formatting starts. Depending on data carrier size, this may
take a while.
68
" or " " to choose between the following operating modes:
" or " " to select whether you want to confirm formatting or cancel the process.
" or " " to select the desired memory type that you want to
" or " ".