B) Setting The House Code - Conrad FS20 SN Bedienungsanleitung

b) Setting the house code

When the batteries are inserted for the first time, a random house code is chosen. If necessary,
the house code can be changed as follows:
2
1 3
hold down for 5 seconds
Status LED D1 flashes
2
1 3
enter 8-digit house code

The house code applies to both channels of FS20 SN.
48
4
4
LED D1 goes out
• Hold down buttons 1 and 3 simultaneously for 5
seconds until status LED D1 starts flashing
slowly (at one-second intervals).
• Now type in the 8-digit house code of your
system using buttons 1, 2, 3, and 4.
The house code must be the same for all wireless
transmitters of the FS20 remote switching
system (note and keep for further reference).
Example: 23141342
1 = button 1
2 = button 2
3 = button 3
4 = button 4
• After entering the eighth digit, programming
mode is exited automatically. Status LED D1
goes out.