E) Activate/Deactivate Channels - Conrad FS20 SN Bedienungsanleitung

e) Activate/deactivate channels

1
2
hold down for 5 seconds
Status LED D1 flashes
2
1 3
Enter channel status

With factory settings channel 2 is deactivated.
4
3
4
LED D1 goes out
• Hold down buttons 2 and 3 simultaneously for
about 5 seconds until status LED D1 flashes.
• Use the buttons to enter the desired channel
status according to the table:
Button Channel 1
1 deactivated
2 activated
3 deactivated
4 activated
• When the new status is entered, status LED D1
goes out.
Channel 2
deactivated
deactivated
activated
activated
51