Operation; A) Displaying Temperature And Air Humidity; B) Display Of Min/Max Values - Conrad WS-9720-IT Bedienungsanleitung

integrated display it makes sense to choose an installation site where the display can be read
e.g. through a window.
The holder (J) included in delivery for the outdoor sensor can be inserted on the bottom, top
or the back, this makes the installation in very different places possible.

12. Operation

a) Displaying temperature and air humidity

In the lower area of the display of the weather station the outdoor temperature (7) and the
outdoor air humidity (8) is shown.
Up to three outdoor sensors can be selected with the "CH" button. The respectively active
channel number is additionally displayed (5).

If only one outdoor sensor is registered on the weather station, no channel
number will appear, of course it is not possible to switch between the outdoor
sensors here.
When the reception of the signal of the outdoor sensor is faultless, a radio reception symbol
(6) will appear on the display.
In the top area of the display (1) the time is normally shown. Press the "+" button to switch
between the display of the time and the indoor temperature/air humidity.

b) Display of MIN/MAX values

• With the "MIN/MAX" button you can call the minimum and maximum readings.
This data is saved separately for each of the outdoor sensors. This is why you should first
select the desired outdoor sensor with the "CH" button, when more than one outdoor sensor
is registered.
• By pressing the "MIN/MAX" button briefly several times, the respective readings will now
be displayed consecutively.
The weather station saves the time and date when the extreme reading takes place, this
information is shown on the top on the display.
On the bottom on the display "MIN" or "MAX" will appear as well.
54