Language Setting; Advanced Menu Settings - Panasonic WV-CW970 Bedienungsanleitung

3. Use the joystick to move the cursor the character you
want to input, and then press the CAM (SET) button.
The text input procedure is the same as that for
camera ID input.
See steps 3 through 5 under "Camera ID Settings"
on page 24 for information about inputting the text
for the preset ID and specifying its position on the
display.
PRESET NO. 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
COPY POSI RET RESET
DOOR............
To copy the preset ID of another position number
Move the cursor to COPY, and then press the CAM
(SET) button. This displays the preset ID of the
position number preceding the one you are
currently configuring. Each press of the CAM (SET)
button scrolls back to the next sequential position
number and displays its preset ID.

Language Setting

1. Move the cursor to LANGUAGE O, and then press
the CAM (SET) button.
2. On the 8-language selection menu that appears,
select the language you want to use.
The factory default setting is English.
* All of the example screens in these Operating
Instructions show English display messages.
3. Move the cursor to SET, and then press the CAM
(SET) button.
When you switch the languages, the password and
titles are deleted.
* The item that was set flashes when the language is
being changed and stops flashing when the
language has been changed. Do not operate the
system controller when changing settings.
* If you have selected either Japanese or Chinese as
the language, only the IDs and titles can be set in
katakana or Chinese.
* The "LANGUAGE" display remains in English even
when the language setting is changed.

Advanced Menu Settings

The advanced setup menu can be displayed from the
setup menu.
1. Display the setup menu (page 24), move the cursor
to → ADVANCED SETUP, and then press the CAM
(SET) button.
This will display the advanced setup menu.
MODEL
CAMERA
PAN/TILT
AUTO TRACKING
ALARM
SPECIAL
COMMUNICATION
SCENE SELECT
LANGUAGE
QUICK SETUP
PASSWORD LOCK OFF
All items can be set on the advanced setup menu.
To switch back to the quick setup menu from the
detailed menu, move the cursor to →QUICK SET
UP, and then press the CAM (SET) button.
Refer to the pages below for details of setup menu
items.
q CAMERA
w PAN/TILT
e AUTO TRACKING
r ALARM
t SPECIAL
y COMMUNICATION*
u SCENE SELECT
i LANGUAGE
o QUICK SETUP
!0 PASSWORD LOCK
* This item appears only when RS485 settings are
configured with the DIP switches.
-27-
WV-CW970 SERIES
q
e
t
u
o
Camera Settings
Pan/Tilt Settings
Auto Tracking Settings
Page 41
Alarm Settings
Special Settings
Communication Settings
Scene Select Settings
Language Setting
This page
Quick Menu Settings
Password Settings
w
r
y
i
!0
Page 28
Page 33
Page 44
Page 47
Page 20
Page 25
Page 24
Page 50