Using The Setup Menu; Displaying The Setup Menu; Camera Id Settings - Panasonic WV-CW970 Bedienungsanleitung

Using the setup menu

This manual describe procedures for operating system
controller WV-CU650.
All setting configuration procedures start from the
setup menu. This section explains how to display the
setup menu and provides details about the menu items
that it contains.

Displaying the Setup Menu

When using the WV-CU650
(1) Select the camera (this camera), and the
monitor where displays the setup menu.
(2) Press the MENU button to display LCD MENU
CAM 101.
(3) Press the ENTER button or CAM (SET) button to
display CAMERA SETUP.
(4) Press the F1 button.
MODEL
CAMERA ID
SCENE SELECT
PRESET POSITION
AUTO TRACKING
LANGUAGE
→ ADVANCED SETUP
Refer to the pages below for details.
q CAMERA ID
w SCENE SELECT
e PRESET POSITION
r AUTO TRACKING
t LANGUAGE
y ADVANCED SETUP
WV-CW970 SERIES
q
OFF
e
t
y

Camera ID Settings

This page
Scene Select Settings
Page 25
Preset Position Settings
Page 25
Auto Track Settings
Page 41
Language Setting
Page 27
Advanced Menu Settings
Page 27
Camera ID Settings
The camera ID is a series of alphanumeric
characters that indicate the location of the camera.
This item can be used to turn display of the camera
ID on the monitor screen on or off, and to input the
camera ID.
1. Move the cursor to CAMERA ID, and then tilt the
joystick left or right to toggle camera ID display on
and off.
2. Select ON or OFF, and then press the CAM (SET)
button. The factory default setting is OFF.
3. Use the joystick to move the cursor the character
you want to input, and then press the CAM (SET)
button.
This will cause the selected character to appear in
the camera ID input area. Repeat step 3 as many
times as necessary to input all of the characters for
the camera ID. (Example: DOOR)
To input a blank space
Move the cursor to SPACE, and then press the
CAM (SET) button.
To delete all previously input characters
w
Move the cursor to RESET, and then press the CAM
r
(SET) button.
To change previously input characters
Use the joystick to move the cursor to the camera
ID input area. Next, tilt the joystick left and right to
move the ↑ pointer to the character you want to
change. Finally, use step 3 above to input the new
character.
4. Move the cursor to POSI, and then press the CAM
(SET) button.
This will display the ID position setting menu.
5. Use the joystick to select a camera ID display
position, and then press the MON (ESC) button.
This registers the camera ID display position and
returns to the camera setting menu.
-24-
CAMERA ID---
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
---- POSI RET RESET
DOOR............
Camera ID Input area
DOOR