Operation Examples - Panasonic WV-CW970 Bedienungsanleitung

Operation Examples

This section describes a number of camera operation
examples. For details about operation, see page 41
(Auto Tracking Settings) of this manual, and the user
documentation that comes with the peripherals you are
using.
Operation Example 1: When
Alarm Output 1
Sequential
Auto Tracking In
Movement
Progress
1. Configure the PRESET settings (page 33).
Register each preset position.
For each registered preset position, select ON for
AUTO TRACK for the positions you want to include
in the auto tracking. Auto tracking will not include
any preset position whose AUTO TRACK setting is
OFF.
PRESET NO.
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
PRESET SPEED
AUTO TRACK
RET TOP DEL
2. Configure the AUTO MODE setting (page 35).
Select SEQ for the AUTO MODE setting.
**PAN/TILT SETUP**1/2
PRESET
MAP
HOME POSITION
SELF RETURN
AUTO MODE
AUTOPAN KEY
PATROL
PRIVACY ZONE
IMAGE HOLD
DIGITAL FLIP
PROPO.P/T
3. Configure the AUTO TRACK setting (page 41).
Select ON for the ALARM setting.
Configure the other parameters in accordance with
the operating environment.
following a
sequence (with alarm output),
the camera switches to auto
tracking when it reaches a
particular preset position,
and then returns to the preset
sequence after 30 seconds of
auto tracking.
Auto Tracking Stop
Sequential
30 seconds
Movement
1*
ON
ALC
MANUAL L
10S
1
••••••I255
L H
ON
1
OFF
OFF
SEQ
AUTO PAN
OFF
OFF
ON
ON
preset
Important:
accordance with the operating environment can
cause operational errors. Configure the settings
while carefully checking the AUTO TRACK setting
(page 41).
Note: If the alarm is turned on, an alarm signal is
continually output from ALARM OUT 1 while an auto
tracking operation is in progress.
4. Configure ALARM IN/OUT settings (page 45).
Select ALARM for CNT-CLS1.
5. Configure the SELF RETURN setting (page 35).
Select either 30S or SEQ.
Operation Example 2: While
Alarm IN 1
Auto Panning
-21-
** AUTO TRACKING **
CAMERA HEIGHT 2.50M
OBJECT SIZE SMALL
SENSITIVITY MID
TRACKING MODE MID
ZOOM CONTROL CONTINUOUS
AUTO RELEASE OFF
LOST MODE ZOOM-OUT
ALARM ON
AREA SET
INDICATOR OFF
RET TOP
Failure to configure
**ALARM IN/OUT**
ALARM IN1 OFF
ALARM IN2 OFF
ALARM IN3 OFF
ALARM IN4 OFF
CNT-CLS 1 ALARM
TIME OUT 100MS
CNT-CLS 2 OFF
COAX ALM OUT OFF
RET TOP
**PAN/TILT SETUP**1/2
PRESET 1
MAP
HOME POSITION OFF
SELF RETURN 30S SEQ
AUTO MODE SEQ
AUTOPAN KEY AUTO PAN
PATROL
PRIVACY ZONE OFF
IMAGE HOLD OFF
DIGITAL FLIP ON
PROPO.P/T ON
auto
camera moves
Position 1 in accordance with
input at ALARM IN 1 and then
performs auto tracking. To
return to
operation one minute after
auto tracking
seconds of auto tracking and
10 seconds of self-return)
Auto Tracking Ends
Auto Tracking Enabled 10 seconds
50 seconds
settings in
panning, the
to Preset
auto panning
starts (50
Auto Panning