Rs-232C Interface; Rs-Trg Circuit - Sony LT10A Serie Bedienungsanleitung

8-3. RS-232C Interface

1. Signals (Conforming to EIA-RS-232C)
Signals : Asynchronous, start-stop system,
Data signalling rate : 600, 1200, 2400, 4800, 9600,
Data length : Switchable between 7 or 8 bits
Parity : None, odd, or even selectable.
Stop bits : Switchable between 1 or 2 stop bits
Cable length : Max.15 m
• Switching of the various parameters is performed in
the initial settings (P16).
• The above underlined items are the settings at the
time of shipping.
34
(E)
full duplex system
19200, 38400 bps

8-4. RS-TRG circuit

Input circuit : Common I/O connector pin 6
Counter unit
5 V
1 k
RS-TRG input
IN
GND
Externally connected device
(Connection Type)
OUT
–COM
LT10A / LT11A Series