Sony LT10A Serie Bedienungsanleitung Seite 98

Model LT10A-105
Item LT11A-101
Peak hold function Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector;
update stop by pause input.
Resolution
Direction
Maximum response speed
Addition and subtraction function
Alarm
Data storage
Temperature
*5
Power consumption
Mass Approx. 200 g
Power voltage
Compatible measuring unit
∗ ∗ ∗ ∗ ∗ 3: RS-232C (8 pin mini-DIN connector)
Reset, preset value setting/recall, peak-hold start, peak-hold pause,
current value hold, software version read, comparator value setting,
current value/maximum value/minimum value/peak-to-peak measuring
mode selection and output, key lock and release.
42
(E)
105B
101B
Can be started with RS-232C can set
—
the BCD terminal.
0.001 mm, 0.005 mm, 0.01 mm selectable (0.001 mm (0.0001") is LT11A series only.)
100 m/min
—
Displayed on LCD or the I/O connector's comparator outputs are all "H" (OFF).
BCD alarm
—
terminal "H" (OFF)
Resolution, direction, comparator value, preset value, modes, etc.
— BCD sign
Operating temperature: 0 to 40°C Storage temperature: –10 to 50°C
1.8 W 2.9 W
Approx. 230 g
Power input connector (3 pins) : DC9.0 to 26.4 V.
105C 205
101C 201
—
or start.
Can be switched
A+B, A–B, B–A can be set with the direction setting.
— —
Data signalling rate, etc. —
2.0 W 2.3 W
Approx. 220 g Approx. 210 g
DT series
∗ ∗ ∗ ∗ ∗ 4: RS-TRG pin
Trigger input for RS-232C data output
∗ ∗ ∗ ∗ ∗ 5: With measuring unit connected.
205B 205C
201B 201C
Can be started with RS-232C can set
the BCD terminal. or start.
80 m/min
BCD alarm
—
terminal "H" (OFF)
BCD sign Data signalling rate, etc.
4.0 W 2.5 W
Approx. 270 g Approx. 230 g
LT10A / LT11A Series