Installation And Connection; (Before Operation); Installing The Expansion Unit - Sony LZ51-C Bedienungsanleitung

3. INSTALLATION AND CONNECTION

(Before operation)

Before operating the expansion unit, please read this section
thoroughly for proper use of the unit.
Also, make sure that you install and set the expansion unit
correctly in accordance with the installation procedures given
in this manual.
3-1. Installing the Expansion Unit .................................. 62
3-2. Connecting the Output Connector .......................... 63
3-3. Checking the Initial Settings ................................... 64
3-4. Initial Settings (Be sure to perform these
preparatory operations before use.) ....................... 65
3-4-1. Menu Selection .......................................... 67
3-4-2. Collective Automatic Setting ...................... 69
3-4-3. Transfer Speed and Other Settings ........... 72
3-4-4. Unit No. Setting ......................................... 78
3-4-5. Output Request Data Setting ..................... 83
3-4-6. Setting External Printing Using the Universal
Input Signal (LY51 display unit menu
addition) ..................................................... 85
62

3-1. Installing the Expansion Unit

(1) Remove the screening cover of the expansion unit slot
and insert the expansion unit.
The expansion unit may be installed in any of the three
slots.
(2) Secure the expansion unit firmly in place using the screws
which held the screening cover in place.