(3) Data length setting (Continued from P.72.)
3. Select "dAT" and press
The data length setting menu screen appears.
The selected item flashes.
The initial value is 8 bits (8).
"7" : 7 bits
"8" : 8 bits
4. Select the desired item with the cursor movement
keys
.
• To enter the settings
5. After selecting the desired item, press
Enters the data length.
(In this case, "8 bits" (8).)
The setting contents light steadily for approximately
2 seconds for confirmation.
• To interrupt the settings
5. Press
RESET
or select "End" and press
Interrupts the data length setting.
(Previous setting contents remain.)
.
ENTER
.
ENTER
.
ENTER
Main display
Sub-display
Main display
Sub-display
(Lights)
↓
(After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display
75