Locations And Functions Of Parts And Controls; Front - Sony TU-1040E Bedienungsanleitung

Location and Function of Par ts and Controls

Front

1 Programme indicator
Indicates the selected channel number.
2 AFT indicator
When the AFT (automatic fine tuning) circuit is
activated, the indicator lights up.
3 POWER indicator
When the tuner is turned on, the indicator lights up. The
POWER indicator also functions as the battery indicator.
When the internal battery becomes weak, the indicator
flashes.
4 MEMORY button
Use this button to add or erase a channel in the channel
scan memory.
5 FINE button
Press this button for a few seconds to fine tune the
channel.
6 SYSTEM button
Use this button to select the TV system.
CATV 1 2
POWER
SYSTEM 4 5
7 8
FINE
MEMORY 0 ENTER
AFT
7 CATV button
Press this button to select CATV.
8 0-9 buttons
Use these buttons to select a channel.
9 ENTER button
Press this button to decide the selected channel.
To select channel 14, for example, press 1n4nENTER.
!º PROGRAM +/–
MEMORY ADD/ERASE buttons
Use these buttons to scan channels, to add/erase
channels in the channel scan memory, or to adjust the
fine tuning.
!¡ POWER switch
Depress to turn the tuner on.
3
PROGRAM POWER POWER
6
ADD
9
MEMORY
ERASE
ON
OFF
3