Menu Selection - Sony LZ51-C Bedienungsanleitung

3-4-1. Menu Selection

The RS-232C initial settings can be performed by turning on the power and entering the initial setting mode. See the LY51
instruction manual for entering the initial setting mode.
1. Display the initial setting menu in accordance with the
procedures given in the LY51 instruction manual.
When no initial settings have been input or when the stored
data has been lost, "d.Error" is displayed. In all other cases,
the display is blank.
When the RS-232C unit is inserted, "rSC" appears in the
menu.
2. Select the desired item with the cursor movement keys
.
The selected item flashes.
3. Press while "rSC" is flashing.
ENTER
The RS-232C initial setting screen appears.
4. Select the desired item with the cursor movement keys
.
The selected item flashes.
(1) "AUTO" : collective automatic setting,
(2) "MANUAL" : individual item setting
(3) "VEr" : version display
"End" for Ver. 01.0E and earlier versions instead of "VEr".
Main display
Sub-display
Main display
Sub-display
(1) (2) (3)
67