4. Select the desired item with the cursor movement
keys
.
The selected item flashes.
5. Select the data you wish to output and press
Enters the output data when "R" command is input.
(In this case, the 2nd axis value (2) is output.)
The setting contents light steadily for approximately
2 seconds for confirmation.
• To interrupt the settings
3. Press
RESET
or select "End" and press
Interrupts the output request data settings by "R"
command.
(Previous setting contents remain.)
84
.
ENTER
.
ENTER
Main display
Sub-display
Main display
Sub-display
(Lights)
(After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display
↓