(Continued from 3-4-1 (2).) (P.68)
1. Select "AdrS" and press
ENTER
Sets the unit No.
The selected item flashes.
"MX" : Number of units connected (maximum unit No.)
"No." : Own unit No.
2. Select the desired item with the cursor movement keys
.
At this point, the operations are divided into cases (1) to (3) below.
(1) Maximum unit No. setting
(2) Own unit No. setting
(3) End settings
The operations for each case are described below.
.
Main display
Sub-display
(1)
(2)
(3)
79