Functions - Sony LZ51-C Bedienungsanleitung

3. NAME AND FUNCTION OF EACH
3. NAME AND FUNCTION OF EACH

4. FUNCTIONS

PART
PART
The RS-232C data output of the expansion unit has a number
of items which can be set including the type of data output
and the output format.
(1) Output data
In addition to the current value, the maximum, minimum and
peak-to-peak values can be output using RS-232C data
output.
For the current value, the 1st axis, 2nd axis, and the value
obtained by adding and subtracting these axes can be output.
When a comparator unit is connected, the comparator setting
values and judgment results can also be checked.
The output data is determined by the output selection and is
not affected by the display mode.
(2) Output selection
The data output when the data output request command "R"
is input is recalculated each time the data is requested.
This data can be switched by the initial settings.
Data other than that specified by the "R" command is output
by the memory output command "M".
This data is the previously calculated data.
88
Note
The data that can be output by the "R" command is only the
current, maximum, minimum and peak-to-peak values.
The comparator setting values and other data cannot be
output.