Sony LZ51-C Bedienungsanleitung Seite 98

MODE key, external mode input related commands
When you wish to switch the display, the display can be switched between "current value" and "peak value" only
when the peak value is selected for the main display.
• To display the current value → "DN" command
• To switch to peak hold display → "DP" command
• To switch the display mode (current value ↔ peak hold) → "DM" command
Comparator value setting related commands
• To set a comparator value → "SC011=value" command
Number : Signed max. 7-digit number with decimal point
When changing the comparator setting values in succession, setting values can be changed more easily than
with key operations by creating a program that sends the setting values by personal computer, etc.
Note
Comparator setting value input
1 When using a comparator unit (LZ51-K/LZ51-R), RS-232C commands cannot be used while setting the
comparator setting values.
The command for changing the comparator set No. is "SCN = set No. (01 to 16)".
2 When inputting the comparator setting values, do not input large amounts of data continuously but insert
waits. Continuous input may not be accepted in some cases.
96
Comparator setting value No. (1 to 4)
Comparator set No. (01 to 16)