Key Operations Using Rs-232C Commands - Sony LZ51-C Bedienungsanleitung

5-3. Key Operations Using RS-232C Commands

Operation can be performed using RS-232C commands in place of key operations.
The basic format for RS-232C commands is as follows.
=
[ [ [ [ [ | | | | | ] ] ] ] ] [ [ [ [ [ | | | | | ] ] ] ] ] [ [ [ [ [ | | | | | ] ] ] ] ]
Note
When commands contain preset and other values, make sure the resolution of the numbers matches the display resolution.
Commands containing decimal digits or numbers which do not match the resolution are invalid.
Also, insert a delimiter for each command. Successive commands input to the same line are not executed.
RESET key, external reset and external restart input related commands
• To set count display from the initial settings → "C" command
• To reset the current value → "CN" command, or "C" command while the current value is displayed
• To clear the peak value and restart → "CP" command
• To clear the comparator value and stop comparator operation → "CCM" command
• To reset the error message display → "C" command
• To cancel the operation part-way → "C" command
Note
Operation cannot be canceled part-way during initial setting menu operations.
94
3 Value
2 Sub-command (0 to 4 characters)
1 Main command (1 character)