(1) Maximum unit No. setting (Continued from P.79.)
3. Select "MX" and press
The maximum unit No. setting menu screen appears.
The initial value is 1 (1).
The selected item flashes.
4. Select the desired item with the cursor movement
keys
.
• To enter the settings
5. Select the desired No. and press
Enters the maximum unit No. setting.
(In this case, "3" (3).)
The setting contents light steadily for approximately
2 seconds for confirmation.
• To interrupt the settings
5. Press
RESET
or select "End" and press
Interrupts the maximum unit No. setting.
(Previous setting contents remain.)
80
.
ENTER
.
ENTER
.
ENTER
Main display
Sub-display
Main display
Sub-display
(Lights)
↓
(After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display