3-4-3. Transfer Speed and Other Settings
(Continued from 3-4-1 (2).) (P.68)
1. Select "Hrd" and press
Sets the data displayed on the main and sub-displays.
The selected item flashes.
"brT"
: Transfer speed
"PTy"
: Parity
"dAT" : Data length
The item menu is switched using
"STP" : Stop bit
2. Select the desired item with the cursor movement keys
.
At this point, the operations are divided into cases (1) to (5) below.
(1) Transfer speed setting
(2) Parity setting
(3) Data length setting
(4) Stop bit setting
(5) End settings
The operations for each case are described below.
72
.
ENTER
F .
Main display
Sub-display
(1)
(2)
Main display
Sub-display
(4)
(3)
(5)
(5)