Time Interval Between Two Measurements; Spot Size Calculator; Transport, Packaging, Storage; Maintenance - LumaSense Technologies IMPAC IP 140-LO Betriebsanleitung

IMPAC pyrometer IP 140-LO
10.12

Time interval between two measurements

This function sets a time interval. After each interval
one measured value is stored on the PC. The bigger
the time interval the smaller will be the stored file.
This function is mainly used for long term measure-
ments.
10.13

Spot size calculator

After input of the aperture and the main spot size, the input of interim values it calculates spot sizes
in different measuring distances of the fixed optics or a fixed adjusted optics.
11

Transport, packaging, storage

With faulty shipping the instrument can be damaged or destroyed. To transport or store the instrument,
please use the original box or a box padded with sufficient shock-absorbing material. For storage in humid
areas or shipment overseas, the device should be placed in welded foil (ideally along with silica gel) to pro-
tect it from humidity.
The pyrometer is designed for a storage temperature of -20 to 70°C with non-condensing conditions. A stor-
ing out of these conditions can damage or malfunction the pyrometer.
12

Maintenance

12.1

Safety

Attention during pyrometer services:
Should the pyrometer be integrated in a running machine process the machine should be switched off and
secured against restart before servicing the pyrometer.
12.2

Service

The pyrometer does not have any parts which require regular service, only the lens has to be kept clean.
The lens can be cleaned with a soft cloth in combination with alcohol (do not use acid solutions or dilution).
Also standard cloths for cleaning glasses or photo objectives can be used.
12.3

Optics replacement

The pyrometers are equipped ex works with a small fixed optical head or alternatively with a bigger pread-
justed or focusable optical head. The optical heads can be changed against another from the same type. A
recalibration of the pyrometer is not necessary. Replacement can be necessary if the lens is scratched or the
pyrometer will be used for other measuring distances.
22