Steca Grid 20000 Installationsanleitung Seite 52

EN
Error
Error message
code
0A011E Activation PS 5
Parameter error PS
0A011F
0A0120 Communication PS
0A0130 PS elements
0A0131 Combine relay
0A200D Overtemperature 6
0B0001 System 1
0B0002 System 2
0B0003 System 3
0D0001 System error
0D0002 PS bootloader
50
Description
Uploading of DC links has failed.
Faulty reading or writing process
5 in power section memory
Communication malfunction be-
tween power section and control
and regulation unit
Faulty configuration of elements
for the power section
Switching the combine relay has
Device temperature too high
Error in error management sys-
Error memory is full.
Error memory is full
A connection to the power sec-
tion could not be established
during the firmware update.
Power section bootloader faulty
Action
1.) Switch off device with DC dis-
3.) Switch on device with DC dis-
Do nothing. The inverter will ac-
knowledge the error automatically.
If problem occurs repeatedly, con-
failed.
Do nothing. The inverter will ac-
knowledge the error automatically.
If problem occurs repeatedly, con-
tem
1.) Switch off device with DC dis-
connector.
2.) Wait until the display has
turned off completely.
3.) Switch on device with DC dis-
connector.
If this does not rectify the error,
contact Service.
One of the power section's two
bootloaders is faulty.
This text is displayed for informa-
tion purposes only. The inverter
will continue to function.
Please contact Service and ar-
range for a firmware update to be
performed.
748.508 | Z01 | 2013-06-10
connector.
2.) Wait until the display has
turned off completely.
connector.
If this does not rectify the error,
contact Service.
tact Service.
Please contact Service.
tact Service
Please contact Service.