Steca Grid 20000 Installationsanleitung Seite 31

1. Use the "▲" and "▼" keys to select the country code which is specific for your country and
your location.
- When you select the country code, you automatically select the menu language
at the same time.
- The menu language can be changed in the menu at any time.
2. Press " "to confirm.
Note:
Accepting the country code
The display will show a safety prompt asking you whether you wish to accept the country
code. After having accepted the country code, it is no longer possible to change it.
1. Confirm the country code only if you are absolutely sure.
- If you are not sure, press "ESC" to cancel your selection. In this case, you cannot put
the device into operation and using the menu is not possible any longer.
- If you wish to accept the country code, press "
Changing the menu language
The language selected does not affect the country code in any way. Proceed as follows to
change the menu language:
1. Press "F1" to open the menu.
2. Use the "▼" and "▲" keys to select the forth menu item: Configuration.
3. Press " "to confirm.
4. Use the "▼" and "▲" keys to select the first menu item: Languages.
748.508 | Z01 | 2013-06-10
If network conditions are difficult at a location in Italy, you can select the
"Italia Option" setting, provided this has been specifically approved by
ENEL.
" to confirm.
EN
29