Menu Structure - Steca Grid 20000 Installationsanleitung

Figure No. 21
Press the ESC key to return to the basic screen display.
Input of standardized data:
To obtain the standardized yield data, press the F2 key and enter the connected PV generator
power under parameter P1155 as follows:
keys:◄►: Press the ◄ key => selects the digit to the left of the decimal point
Press the ► key => selects the digit to the right of the decimal point
key ▲: Whenever you press this key, the number at the digit selected is incremented
by 1.
key ▼: Whenever you press this key, the number at the digit selected is decremented
by 1.
Figure No. 22
Press the ESC key, the previous "normalized yield" level will displayed.
Press the F1 key to display the menu.
Press the to apply the set value. However, this requires that the password is correct.

5.6 Menu Structure

The menu structure serves as a support to change to the individual information displays and setting
displays.
Legend:
748.508 | Z01 | 2013-06-10
Standardized yield data display
Standardized data input display
Legend
Backward and backward to menue
F1
ESC Backward
Confirmation
Arrow key right/ left
Arrow key op/ down
EN
35