Protection Against Magnetic & Electro-Magnetic Fields During Operation & Assembly; Protection Against Touching Hot Parts - Steca Grid 20000 Installationsanleitung

EN
2.5 Protection against magnetic & electro-magnetic fields during
operation & assembly
Danger to health for persons with pace-makers, metallic implants and hear-
ing aids in direct proximity to electrical equipment.
 Persons with pace-makers and metallic implants must not as a rule enter
 Should people wearing pace-makers need to enter such areas, then the
WARNING
 Persons with metal implants or metal splinters as well as those with hear-

2.6 Protection against touching hot parts

Danger of burns through hot surfaces and housings.
The upper part of the housing as well as the refrigeration unit can reach a surface
temperature of 75 °C with a surrounding temperature of 45 °C.
 Do not touch housing surface near to hot sources of warmth.
CARE
 Allow the device to cool down for 15 minutes before touching the surface
8
areas in which electrical devices and parts are being assembled, oper-
ated or are being brought into service.
decision as to whether this is permitted is to be made by a doctor before-
hand. The immunity from interference of pace-makers which have al-
ready been implanted or will be in the future varies greatly, meaning that
no generally valid rules exist about this.
ing aids must ask a doctor before entering such areas, as impairments to
health are to be expected there.
of the device.
748.508 | Z01 | 2013-06-10