Ethernet - Steca Grid 20000 Installationsanleitung

EN
Note:

4.15 Ethernet

Please use an Ethernet cable with S/FTP design (shielded foiled twisted pair).
Note:
26
The RS485 interface connecting cables must be shielded.
The shield must be applied according to the plug manufacturer's
specifications. The outer diameter of the connecting cable can be max.
8 mm.
Also, 2 x RS485 connectors (IN / OUT) 4-pin Phoenix Contact Type M12
MS SACC-4SC SH must be used.
By Not observing these requirements the IP65 protection class can not be
guaranteed!
Also, an Ethernet connector from Phoenix Contact Type VS-08-RJ45-5-Q
/ IP67 must be used. By Not observing these requirements the IP65
protection class can not be guaranteed!
748.508 | Z01 | 2013-06-10