Preparing The Telephone For Use As Wall-Mounted Device - Auerswald COMfortel 1400 IP Inbetriebnahmeanleitung

Fig. 8: Feet of the casing

Preparing the Telephone for Use as Wall-mounted Device

Requirements
– Small screw driver (approx. 4 mm wide)
Insert the screw driver into the slot at the lower edge of the receiver recess
1.
(see
Fig. 9: Inserting a screw driver
44
Fig. 9).
COMfortel 1400 IP - Firmware V2.4 - Setup V05 12/2015