Creating And Configuring Account For Voip Providers - Auerswald COMfortel 1400 IP Inbetriebnahmeanleitung

Further Steps
– Configure a username and a password for the configuration manager (see
page

Creating and Configuring Account for VoIP Providers

Requirements
– Setup assistant started (
– Account configured at a VoIP provider and knowledge of the access data
Tap on With provider profile.
1.
Tap on the profile of the required VoIP provider (e.g. Talk2u IPv4 V100).
2.
If required, you can now setup VLAN (see operation guide Settings > Ether-
3.
net > Switching the VLAN On/ Off and Configuring it).
Tap on OK.
4.
In the Username entry field, enter the username specified by the VoIP pro-
5.
vider.
Note: To edit incorrect entries, tap on the required entry field and the
Android keyboard with a delete button opens. If you press the back key, the
Android keyboard closes.
In the Password entry field, enter the password given by the VoIP provider.
6.
Tap on OK.
7.
Select the country for the location of the account in the list field.
8.
Tap on Area code and then enter the area code for the location of the ac-
9.
count.
Tap on Numbers and then enter the telephone number specified by the
10.
VoIP provider.
Tap on OK.
11.
Tap on Default account.
12.
Note: If another account (e.g. a system telephone account) has already
been selected as default account, select the Not default account option.
COMfortel 1400 IP - Firmware V2.4 - Setup V05 12/2015
58).
> Settings > Setup assistant)
55